A simple beam is supported by a pin at one end and a roller at the other. Where is it most likely to be statically determinate?
Explanation
This question tests the recognition of the most common statically determinate beam support configuration.
Other questions
In the context of idealized structures, which type of support connection allows for slight relative rotation but prevents translation?
For a coplanar structure with 'r' unknown reactive force and moment components and 'n' parts, what is the mathematical condition for the structure to be classified as statically determinate?
According to the ACI 318 code mentioned in the text, a slab supported on four sides is considered a 'one-way slab' if the ratio of the long side (L2) to the short side (L1) is what?
A floor system is supported by bar joists that are 15 ft long and spaced 2.5 ft on centers. The floor is made of 4-inch thick lightweight concrete, which has a dead load of 32 lb/ft2. The live load for its classroom use is 40 lb/ft2. What is the uniform load 'w' that acts along each joist?
What is one of the two requirements that must be satisfied for the principle of superposition to apply in structural analysis?
A simple beam is supported by a fixed support at one end and a pin support at the other. How would this beam be classified regarding its determinacy?
What is the term for the visual representation of how loads are transmitted from their point of application through the structural elements to the foundation?
A square reinforced concrete slab measures 15 ft by 15 ft and is supported by four edge beams. If a uniform load of 100 lb/ft2 is applied to the slab, what is the resulting load distribution on one of the edge beams?
A compound beam is composed of two segments. The first segment is fixed at its left end and connected by an internal pin to the second segment. The second segment is supported by a roller at its right end. How is this structure classified?
Under what condition of support reactions is a structure considered geometrically unstable due to improper constraints?
What is the primary difference in how a fixed-connected framing plan is represented graphically compared to a pin-connected plan?
For a coplanar structure, the three equations of equilibrium (sum of forces in x and y, and sum of moments) are applied to ensure what?
What is the classification of a beam that is supported by three rollers?
A flat roof of a steel-frame building supports a total load of 2 kN/m2. The roof slab spans between two beams, BC and DC, within a region ABCD. The dimension AB is 4 m and the dimension AD is 7 m. For this two-way slab system, what is the peak intensity of the distributed load on the shorter beam, DC?
In a coplanar structure, if there are fewer reactive forces than equations of equilibrium, the structure is considered what?
When is it necessary to dismember a frame and consider the equilibrium of individual members to determine all support reactions?
A parking garage floor system has girders spanning 30 ft, spaced 15 ft apart. The 5-inch thick slab is made of reinforced stone concrete with a density of 150 lb/ft3 and supports a 50 lb/ft2 live load. What is the maximum intensity of the distributed load on an interior girder?
An idealized roller support on a horizontal surface exerts what kind of reaction on the member it supports?
How many independent equilibrium equations are available for a single part of a coplanar structure?
A pin-connected structure consists of three members. It is supported by a pin at one end and a rocker at another, with two internal pins connecting the members. How many unknown force and moment reactions are there in total if the structure is fully disassembled?
What is the general condition for a coplanar structure with n members and r reactions to be considered geometrically unstable?
Why is it important for a structural engineer to be able to create an idealized model of a structure?
What type of support has three unknown reactions in a coplanar analysis?
A beam is simply supported by a pin at one end and a roller at the other. A concentrated load P is applied at its mid-span. The beam is made of steel with a W10 x 19 cross-section. The deflection analysis shows a rotation of 0.0103 radians at the pin support. If the top and bottom flanges are 5.12 inches from the neutral axis, what is the horizontal displacement of the top or bottom flange at the pin?
In a two-way slab system, what is the geometry of the tributary area for a supporting beam when the slab is square?
What is the primary function of a girder in a typical floor framing system?
If a structure has more unknown forces than available equilibrium equations, it is called what?
A compound beam consists of three segments connected by two internal pins. It is supported by a pin at the far left end and two rollers. How is this structure classified?
What are compatibility equations, and when are they used?
The load path for a typical building floor described in the text involves loads being transmitted in what sequence?
A frame has a closed loop. In order to classify its determinacy using the method of sections, how many cuts are required through the loop?
What does the 'method of sections' involve when determining internal loadings in a member?
A pin-connected L-shaped frame is supported by a pin at the corner and a roller on the horizontal leg. The reactions are three forces that are all concurrent at the corner pin. What is the stability classification of this member?
The principle of superposition requires that the material behaves in a linear-elastic manner. This implies that which law is valid?
A compound beam consists of two members joined by an internal pin. The left member is supported by a pin and a roller. The right member is supported by a single roller. How is this structure classified?
What is the primary reason for using a free-body diagram in structural analysis?
A beam is supported by a pin support and two roller supports. How would this structure be classified?
In the example of the Kansas City Hyatt Regency walkway collapse, what was the critical flaw in the altered design?
What are the three components of internal loading that can exist at a section of a member in a coplanar structure?
In a floor system where beams are connected to columns at the same elevation, and the slab is reinforced in two directions, what is the key factor that determines if the slab behaves as a one-way or two-way system?
A horizontal beam is supported by two rollers on the bottom and a single roller pushing horizontally on one end. How would this structure be classified?
If a structure is found to be geometrically unstable, what is the next step in the analysis?
The load path on a suspension bridge involves forces being transmitted in which sequence?
A beam is fixed at both ends. How would it be classified?
In a framing plan, what is the graphical convention for reinforced concrete beams that are below a slab?
What is the degree of indeterminacy of a structure?
A simple beam supported by a pin and a roller is subjected to two separate vertical loads. According to the principle of superposition, how can the total displacement at a point be found?
If a structural analysis of a frame with fixed supports is performed and one of the calculated moment reactions is negative, what does this signify?
A frame member is supported by a single fixed support. How is it classified?